Tribu Pavilion Daybed
PAVILION DAYBED
PAVILION DAYBED
Designed By Monica Armani
Monica Armani has updated the classic canopy bed with a slimline frame in powdercoated aluminium.
The daybed can be fully personalised with a choice of aluminium or teak slats for the back and roof or Sunvision canvas, a patented textile that filters out the sun without blocking the sunlight. In the roof, the Sunvision can also be slid back to enjoy the sunlight.
The frame is available in two different colours and the durable Batyline seat lining can be used alone or with two comfortable UV and water-repellent outdoor cushions. The daybed can be further customised with a convenient side table and transparent curtains.
INFORMATION
DOWNLOADS
↓ 01811 Rear Wall Aluminium
↓ 01814 Rear Wall Aluminium
↓ 01821 Rear Wall Sunvision
↓ 01824 Rear Wall Sunvision
MATERIAL
- Teak - Aluminium
FEATURES
- UV and water-repellent outdoor cushions
DIMENSIONS - REAR WALL ALUMINIUM
- Height: 2190mm, 2234mm
- Width: 2190mm
DIMENSIONS - REAR WALL SUNVISION
- Height: 2190mm, 2234mm
- Width: 2190mm
FRAME COLORS
- White - Wenge - White/Teak - Wenge/Teak - White/Movable
CLEANING AND PROTECTION
CLEANING
TEAK SUPER CLEANER
- First moisten the furniture with clear water.
- Shake the Teak Cleaner well before use.
- Apply Teak Cleaner with a soft cloth and allow to soak for 3 minutes.
- Brush the furniture clean with the soft scrubbing pad in the direction of the grain.
- Rinse well with clear water.
SYNTHETIC SUPER CLEANER
- Rinse the furniture with clear water to eliminate loose dirt.
- Spray the Synthetics Super Cleaner on the surface and let it soak.
- In case of stubborn stains use a brush to remove the dirt from the pores.
- Rinse with clear water and remove the dirt with a clean, moist cloth.
- Dry with a microfiber cloth. Don’t leave the surface to dry in full sun, this can leave white traces behind.
ALUMINIUM CLEANER
- Rinse the furniture with clear water to eliminate loose dirt.
- Spray the Aluminium Cleaner on the surface and let it rest.
- In case of stubborn stains use a brush to remove the dirt from the pores.
- Rinse with clear water and remove the dirt with a clean, moist cloth.
- Dry with a microfiber cloth. Don’t leave the surface to dry in full sun, this can leave white traces behind.
PROTECTION
TEAK SEALER NATURAL
- Allow new teak to weather for 1 to 2 weeks before applying Teak Sealer. - Clean soiled teak with Teak Cleaner or Teak Super Cleaner and leave to dry until the wood is completely dry. - Stir the Teak Sealer well and keep mixing throughout the application process. - Apply to the teak using a microfiber cloth, synthetic sponge or plants spray in the direction of the grain. Wipe any excess off - With a microfiber cloth. - Leave to dry for 1 hour and apply a second coat. - Wipe over the second coat with a clean cloth. - The teak should be dry to the touch in 1 hour and ready for use the next day.
TEAK PROTECTORE GREY COLOR
- New teak: leave your new furniture outside during a few weeks until they get a pale colour.- Old, grey teak: clean the teak first with Teak Cleaner. If the cleaned wood feels rough, sand slightly before using the Teak Protector. - Make sure that the teak is 100% dry and free of dust. - Shake the bottle for at least one minute. Apply with the soft and lint-free cloth and allow to soak in the teak. - Allow to dry for 4 hours, then apply a second layer. - Let the teak dry for 24 hours before exposing it to moisture.
https://ww
w.instagram.com/p/BzvT4mBjGbz/