Spectrum Lighting SL0306LEDXT Sign Light - 1000 Lm
SL0306LEDXT SIGN LIGHT 1000 LM
SL0306LEDXT SIGN LIGHT 1000 LM
The wide range of combinations for illumination, mounting and finishes allows for creative fixture specification and design. Fixtures may be wall mounted with standard or custom wall arm (goosenecks). LED module and driver are serviceable for future replacement.
information
PRODUCT TYPE
Light
PRODUCTION
Made in United States
CRI
- 82 CRI
- 90 CRI
- 95 CRI
CCT
- 2700k
- 3000k
- 3500k
- 4000k
RATINGS & COMPLIANCE
- Buy American Act
- Made in America
- Wet
DIMENSIONS
- A : 3.25, 82.5 mm
- B : 7.06, 179.3 mm
LUMENS
1000 Lm
LAMP SOURCE
LED
APPLICATIONS
3" diameter machined aluminum Sign Light for focused adjustable spot lighting.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
LED system features Xicato LED module with proprietary phosphor technology that converts high brightness blue LEDs into uniform white light. Designed to provide consistent, stable color with CCT control of +/- 100K over life of the light engine. Base CRI is 82 with 90, 95 CRI and VividTM options. Variety of electronic 120v/277v and dimming drivers.
CODE COMPLIANCE
ARRA Compliant. ETL listed for damp locations. Optional Wet location. Manufactured and built to UL standards No. 1598/8750.
CONSTRUCTION
Fixture shades are spun in our factory from 0.063 high purity aluminum. Wall enclosures and fittings are die-cast aluminum with stainless steel hardware. Wall arms are formed 3/4 NPT aluminum pipe. Gaskets are machine cut neoprene.
FEATURES
The wide range of combinations for illumination, mounting and finishes allows for creative fixture specification and design. Fixtures may be wall mounted with standard or custom wall arm (goosenecks). LED module and driver are serviceable for future replacement.
INSTALLATION
BEFORE INSTALLATION
- Remove 4 screws from face of CP104 and reserve.
- Thread fixture wire leads through mounting pipe, from top of open fixture.
- Connect pipe to fixture (securing by Coupling and tightening).
INSTALLATION INSTRUCTIONS
-Mount assembly CP104 to wall (hardware by others). Make power connections to driver. -Bring fixture and Mounting pipe up to CP104 housing. Connect pipe to face of CP104 (use set screws to secure). -Make connection between leads and driver. -Swing face of CP104 with fixture up to wall compartment. -Reattach face assembly to CP104 body secure with hardware reserved. -Adjust to the desired position and tighten the Wing nut.
