Luminis Lumistik Cl821
LUMISTIK CL821
LUMISTIK CL821
Complete family of bollards, columns, pendants and wall luminaires available in various heights and diameters to compliment any area.
information
USE
Exterior lighting
BRAND
Luminis
PRODUCT FAMILY
LUMISTIK
APPLICATIONS
-Area lighting in pedestrian areas -Commercial perimeters -Parks and urban environments
SIZES
6” and 8” diameters
MOUNTING
LumiSTIK is designed for ease of access and installation.
ELECTRICAL DRIVER
Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), operating temperature range of -40ºC to +55ºC/-40ºF to +131ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery. LED 3000K/3500K/4000K CCT with 80 CRI.
DOWNLOADS
↓ Spec Sheet
↓ Installation Instructions
CHARACTERISTICS
-Made of corrosion resistant aluminum alloy -Standard driver is 0-10V dimming-ready (dims to 10%) -Optional RGBW -Dark sky friendly variant
SOURCE
LED
APPLICATION
Wet location
LED COB
is assembled on a thick pad housing chamber designed with a heat sink to optimize heat dissipation and luminaire efficacy. The power supply is enclosed in the aluminum pole.
MATERIALS
LumiSTIK column is made of 6061-T6 extruded aluminum alloy. All other cast parts are corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.
CERTIFICATION
Certified and Approved as per CSA C22.2 No.: 250.0 standard and ANSI/UL 1598 standard, for wet location. Rated IP65. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards.
LIFE
60,000hrs L70B50 (based on IESNA TM-21 Test Method and LM-80 data). Up to 70,000hrs L70B50 (calculated projection from LM-80 data).
FINISH
Five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. Polyester powder coating is applied through an electrostatic process and oven cured for long term finish.
APPLICATIONS
Ideally suited for unique site lighting applications where public space enhancement is the goal.
DETAILS
- Heavy cast aluminum top cover with embedded heat sink.
- Optical system assembly
- Ø 8” (203mm) high impact UV stabilized clear acrylic cylinder
- Ø 1/2” (13mm) aluminum struts.
- Ø 8” (203mm) extruded aluminum column.