Luminis Lumistik Cl820, Cl840, Cl870 Street Lighting

Lumistik STREET LIGHTING

LUMISTIK CL820, CL840, CL870 STREET LIGHTING

Complete family of bollards, columns, pendants and wall luminaires available in various heights and diameters.

Luminis Lumistik Cl820, Cl840, Cl870 Street Lighting
Luminis Lumistik Cl820, Cl840, Cl870 Street Lighting

An innovative solution to accent light in various directions and to emphasize multiple elements creating unique spaces.

INFORMATION

BRAND
  
Luminis

PRODUCT TYPE  

Light

PRODUCT FAMILY

Lumistik

Luminis Lumistik Cl820, Cl840, Cl870 Street Lighting

COLORS

RGBW

CONTROLS

Nlight Enabled

CHARACTERISTICS

- Optional Rgbw
- Dark Sky Friendly Variant
- Made Of Corrosion Resistant Aluminum Alloy
- Standard Driver Is 0-10v Dimming-ready (Dims To 10%)

LED

- 2700K
- 3000K
- 3500K
- 4000K CCT with 80 CRI.

APPLICATIONS

Ideally suited for unique site lighting applications where public space enhancement is the goal.

MOUNTING TYPE

Column

SOURCE

LED

Luminis Lumistik Cl820, Cl840, Cl870 Street Lighting

FEATURES


1- Heavy cast aluminum top cover with embedded heat sink.
2- Ø 8” (203mm) High impact white translucent acrylic diffuser UV stabilized.
3- LED array.
4- Ø 8” (203mm) Extruded aluminum column.

FINISH

Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.

ELECTRICAL DRIVER

Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), operating temperature range of -40ºC to +55ºC/-40ºF to +131ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery. Driver for RGBW is DMX512 / RDM compatible.

CERTIFICATION

Certified and Approved as per CSA C22.2 No.: 250.0 standard and ANSI/UL 1598 standard, for wet location. Rated IP65. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards.

MOUNTING

LumiSTIK is designed for ease of access and installation. See page 4 for mounting details.

LIFE

50,000hrs L85B50 (based on IESNA TM-21 Test Method and LM-80 data).

MATERIAL

-Lumistik column is made of 6061-T6 extruded aluminum alloy. All other cast parts are corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. -LED boards are contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination. LumiSTIK column is available in three standard acrylic lengths. Other lengths are available on request.

INSTAGRAM