Luminis Hollowcore HC2805 Pendent Light
HOLLOWCORE HC2805 PENDENT LIGHT
HOLLOWCORE HC2805 PENDENT LIGHT
A Classic Shape Modernized
Hollowcore brings a whole new dimension to the classic high bay shape that has been so familiar for decades.
With its modern shape and clean aesthetic, Hollowcore is suitable for both traditional high bay applications and more contemporary spaces. And, because of its attractive hollow center, it can be installed as a low bay and viewed from mezzanines and upper floors.
RE-INVENTING THE HIGH BAY
Hollowcore is a re-think of the traditional high bay pendant. Advanced LED technology has enabled the central light source and apparatus commonly used with traditional high bays to be removed. Instead, Hollowcore is designed around a circular LED light engine, enabling an airy open center concept. Not only does the open center concept make Holllowcore aesthetically attractive from above or below, it also enables full control of emitted light
INFORMATION
PRODUCT FAMILY
Hollowcore
LOCATION
Interior
APPLICATION
Damp Location
REFLECTOR
Aluminum Reflector
INNER SURFACE
Specular Anodized
HARDWARE
Stainless Steel Hardware
SOURCE
LED
MOUNTING TYPE
Pendant
COLORS
- 10 Standard Metallic Colors
- Custom Colors Available
CERTIFICATION
- Certified by ETL to UL Standard - Damp Listed
EXTERIOR SURFACE
Satin anodized natural aluminum. Exterior of aluminum reflector can be painted to match housing finish (option ASP).
APPLICATIONS
Hollowcore rises to the challenge of lighting bigger spaces! It delivers ample illumination while making a statement with its good looks and open core. It hits the mark for performance and is well-proportioned for open spaces.
SCALE UP
Bigger spaces need powerful illumination. The larger-scale Hollowcore delivers up to 17,200 lumens of uniform downlight. An optional, independently-controlled uplight is also available, delivering up to 7,800 additional lumens for upward illumination or ceiling highlighting.
LED
LED -2700K -3000K -3500K -4000K CCT with 80CRI.
CHARACTERISTICS
- Classic High Bay Shape
- Integral Driver
- 60,000hrs Lifetime
- Delivers Up To 10,000 Lumens Of Uniform Light
- High-efficiency Lens or Aluminum Reflector
CERTIFICATION
Certified and approved as per CSA C22.2 No.: 250.0 standard and ANSI/UL 1598 standard, for Dry and Damp Location. Rated IP22.
A CLASSIC SHAPE MODERNIZED
Hollowcore brings a whole new dimension to the classic high bay shape. With its modern lines, clean aesthetic and open core, Hollowcore is suitable for both traditional high bay applications and more contemporary spaces.
DOWNLOADS
↓ Brochure (PDF)
↓ Spec Sheet
↓ IES
↓ Revit
↓ Installation Instructions - SPG
↓ Installation Instructions - STM
↓ Installation Instructions - OVERSIZED CANOPY SPG
↓ Installation Instructions - Oversized canopy STM
↓ Installation Instructions - 11" SPG Mount (nLight)
↓ Installation Instructions - 11" Stem Mount (nLight)
↓ Installation Instructions - 15" Stem Mount (nLight)
↓ Installation Instructions - 15" SPG Mount (nLight)
↓ Installation Instruction - Stem Resizing Guide
↓ nLight Reference Guide
LIFE
60,000hrs L70B50 (based on IESNA TM-21 Test Method and LM-80 data).
FINISH
Five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. Polyester powder coating is applied through an electrostatic process and oven cured for long term finish.
FINISH
Five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. Polyester powder coating is applied through an electrostatic process and oven cured for long term finish
MOUNTING
Maximum weight: 40 lbs (18 kg).
The mounting bracket is designed to fit on a octagonal electrical box using 3.5” (89mm) C/C mounting holes. Additional mounting holes are provided
as per site requirements.
ELECTRICAL DRIVER
Standard driver is 0-10V dimming-ready (dims to 1%) with: 120-277 multi-volt compatibility (50-60Hz), operating temperature range of -20ºC/-4ºF to 50ºC/122ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery. Optional 347V driver.
MATERIALS
Hollowcore is made of an aluminum housing which houses integral drivers, and a die-cast aluminum heat sink which supports the LED engine and shade as well as dissipates heat. Hollowcore is available with a choice of
polyethylene lens or aluminium anodized reflector. Both options offer a distinct look and different distributions. Hollowcore comes with an array of 4 curved LED boards for the downlight as well as an optional array of 4 curved boards for the uplight. The uplight boards are mounted onto the aluminum housing, with a clear top cover to protect the LEDs from dust and debris.
ELEMENTS
1- Standard heavy duty 30º hang straight swivel, with Ø7” (178mm) magnetic canopy and universal mounting plate. No visible hardware.
2- Ø 7/8” x 36” (22mm x 914mm) suspension field cuttable stem. Longer stem available on request. Assembly is secured by an inner aircraft safety cable.
3- Spun aluminum housing
4- Curved LED array
5- HC2800: Semi opaque double layer
Polyethylene lens