Emu Cannolè Armchair
CANNOLÈ ARMCHAIR
CANNOLÈ ARMCHAIR
Designed by Gargano Cristell
The Cannolè seating system by Anton Cristell and Emanuel Gargano has a fully welded structure made up of internally and externally galvanized steel tubes.
Seat composed of a galvanized rod grid welded on a rod frame. The legs are made of tubular steel. MIG welding, degreasing and cataphoresis pre-treatment and finishing with thermosetting polyester powders.
The collection consists of: Corner module sofa, linear module sofa, pouf, lounge chair and low table. All Cannolè cushions are made of polyurethane rubber to which a layer of polyester fiber resin is added, all packaged in an internal waterproof polyamide pillowcase.
DESIGNERS
It is hard to confine his multifaceted activity within the professional sphere alone, because his work ranges from architecture to industrial design, from contemporary art to the study of light.
Over the years he has been awarded many prizes, last but not least the prestigious Compasso d’Oro. His art reveals a deep fascination with matter in the natural and synthetic elements which he uses and shapes, searching for their inner soul; it is probably the same thing that life is continuing to do with him, day after day.
Anton Cristell was born in 1972, in New York. While studying at the School of Visual Arts (SVA) in New York and at the School of the Museum of Fine Arts (SMFA) in Boston, he worked as illustrator for several magazines and in the advertising sector. In 2001 he decided to move to Rome where he opened his own design studio.
He has a long-standing experience, especially in the retail and restaurant industry, where he has been successfully merging architecture, design and graphics.
INFORMATION
BRAND
Emu
WEIGHT
28.20 Kg
COVER
Yes
COVER MATERIAL
- Tessuto Basic
- Tessuto Standard
- Tessuto Premium
MATERIAL
- Fabrics Basic
- Fabrics Premium
- Fabrics Standard
- Steel
COVER TYPE
FC/729
TYPOLOGY
Armchair
COLLECTION
Cannolè
PRODUCT CODE
1080
STATIC LOAD
200 Kg
PRODUCTION
Made in Italy
MAINTENANCE - STEEL
To keep the product in good condition for a long time, we recommend storing it indoors and in a dry place during the winter to prevent condensate from forming. Before the winter and on a quarterly basis, if the products are kept near the sea, it is recommended to clean the metal surfaces with a soft cloth using water or detergent and protect them with Vaseline oil or car wax.
MAINTENANCE - FABRICS BASIC, FABRICS PREMIUM & FABRICS STANDARD
Avoid prolonged contact with greasy substances and/or dyes or colorants that could be absorbed by the covering material and cause permanent stains, as well as deteriorating the yarn structure. In the case of use near the sea or swimming pools, periodic washing is recommended.
Frequent washing: follow the specific instructions given on the label for each material. Use water and non-abrasive, colorless, neutral PH liquid detergents. If necessary, allow the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not higher than 30°C (86°F).
If pressure cleaning devices are used, keep the tip of the nozzle at a distance of at least 60-70 cm from the surface of the product. If necessary, repeat the operation. Do not use abrasive sponges to remove stains and do not treat with bleach or chlorine.