Babeld Bangi Lounge Chair
BANGI LOUNGE CHAIR
BANGI LOUNGE CHAIR
Designed by Altherr Désile Park
It is a steel stackable lounge chair with an irregular slatted seat that offers an aesthetically strong personality and a high level of comfort to encourage moments of friendliness and relaxation. Each slat is reinforced with a rib – an elegant technical solution that increases strength without interfering aesthetically.
INFORMATION
PRODUCTION
Made in Italy
PRODUCT TYPE
Easy Chair
BRAND
Babeld
GALVANISING
Application of a zinc layer that provides high corrosion protection.
POWDER COATING
60-80μm polyester powder coating for outdoor resistance and high protection.
DOWNLOADS
↓ Data Sheet
↓ 2D Files
↓ 3D files
MAINTENANCE
Babel d products are treated to guarantee a long service life while preserving their functional and aesthetic qualities. Babel d products will last longer if you take care of them by cleaning them with a soft cloth and water or neutral detergents every three to six months, depending on the environmental and climatic conditions. Do not use abrasive detergents and brushes be careful using babel d products in marine environments with high humidity or near swimming pools, especially in closed environments if chlorine is used as a disinfectant.
DETAIL
This is a range of steel furniture consisting of chairs, small armchairs (all stackable) and tables of different sizes. The shape of the seats with irregular slats offers a dynamic image, high comfort and an unusual aesthetics.
Each chair and armchair slat is reinforced with a welded steel rib on the underside. Similarly each tabletop slat is reinforced along its entire length by a welded steel support that remains invisible. The corrosion treatment by means of a primer (or galvanization on request) and polyester powder coating are highly resistant to harsh atmospheric conditions and guarantee the long life of this furniture while maintaining its aesthetic quality.
MATERIALS AND COLOURS
MATERIALS AND COLOURS
BABEL D offers carefully selected materials and finishes to meet outdoor requirements. Our steel and aluminium alloy furniture is polyester powder coated in a carefully composed colour palette. Tabletops can be in steel or HPL (High Pressure Laminate), PaperStone®, an ecological material derived from paper, Iroko or Grès, available in various colours.
FABRICS AND ROPE (CAT. A)
- 100% acrylic fabric refined and pleasant to the touch while having a certain firmness. It has a natural appearance and can be used indoors and outdoors.
- Protected by a water-repellent finish with an anti-mould, stain-resistant, sun-resistant treatment and high colour fastness.
HPL
High Pressure Laminate (HPL) consists of layers of paper impregnated with thermosetting resins and compacted with decorative paper and a protective coating. It is a self-supporting durable material suitable for outdoor use as it is resistant to weathering. Available in three different colours and textures (chalk white, rust or concrete effect).
PAPERSTONE®
- As an environmentally friendly product, it may be subject to colour variations.
- Using natural pigments instead of chemical dyes ensures greater UV resistance, stable colours and consistent colouring.
- An environmentally friendly material, made from 100% recycled and FSC® certified paper and cardboard with vegetal resin, mainly from pressed cashew nutshells. It is a solid and resistant innovative material.
MAINTENANCE
PaperStone® tabletops can be cleaned with a cloth dampened with warm water and mild soap. The surface has good resistance to stains. However, we recommend that you keep the PaperStone® tabletop dry to avoid limescale deposits. Do not use bleach-based liquid detergents. Avoid using harsh chemicals. Do not use abrasive sponges or metal scrapers.
IROKO
Iroko wood has many properties: in particular, it is resistant to mechanical stress and weathering such as changes in temperature, humidity and UV rays. It is easy to cut despite its hardness. Iroko is characterised by its golden yellow to yellow-brown colour, which tends to darken after seasoning to a warm shade. Iroko is considered a ‘fat wood‘ because it is resistant to water and humidity. It is perfect for furnishing gardens, terraces and porches and has an extremely long life and use.
MAINTENANCE
-For daily cleaning you can use a soft cloth dampened with water and a mild liquid soap. Over time, natural iroko will take on a grey colour due to exposure to sunlight and weathering. Iroko protects itself thanks to its natural oils, which make it waterproof. -Every 4 to 6 months you can clean the product with a neutral detergent, sand it gently with fine-grit sandpaper and then apply a coat of water-based impregnation and wax with a brush.
FABRICS AND ROPE (CAT. B)
- 100% PAC Dralon fabric. It is incredibly soft to the touch and has a pleasant appearance. It can be used outdoors because it is water repellent.
- It has high functional qualities. It is protected against UV rays and is durable and resistant to wear. It is stain-resistant, avoids absorption and makes daily cleaning easier.
METALS
METALS
Fe360, fe490, asform490 steel
- BABEL D products are made from a steel alloy composed of iron and carbon which is 100% recyclable.
- The steel components are protected by a sophisticated galvanic process and then coated with polyester powder in a wide range of carefully composed colours to guarantee their maximum resistance to weathering.
AISI 316 STAINLESS STEEL
Stainless steel consists of iron, nickel, chromium and molybdenum. The latter two components provide high protection against rust and corrosion. Stainless steel provides stability, durability, hygiene compliance and heat resistance and is easy to clean. AISI 316, used by BABEL D, is highly resistant to chloride corrosion.
6060 ALUMINIUM ALLOY
- The protection of steel and aluminium alloys against weathering complies with the Qualicoat ISO 2810 standard for products used in architecture.
- Aluminium alloys resist general corrosion and are fully recyclable and reusable in various industrial fields. A layer of polyester powder coating protects and preserves product qualities.
MAINTENANCE
- The protection of steel and aluminium alloys against weathering complies with the Qualicoat ISO 2810 standard for products used in architecture.
- BABEL D products are treated to guarantee a long service life while preserving their functional and aesthetic qualities. BABEL D products will last longer if you take care of them by cleaning them with a soft cloth and water or neutral detergents every three to six months, depending on the environmental and climatic conditions. Do not use abrasive detergents and brushes Be careful using BABEL D products in marine environments with high humidity or near swimming pools, especially in closed environments if chlorine is used as a disinfectant.