Morica Canette 4 Doors Dresser
CANETTE 4 DOORS DRESSER
CANETTE 4 DOORS DRESSER
The Canette sideboard is a true icon of Haute Couture! This is inspired by the craftsmanship of renowned tailors who were skilled at enhancing each fabric using hand stitching and embroidery to produce a substantial aesthetic impact.
INFORMATION
HANDLES
Carefully selected woods that have been brushed to bring out their pores and grains. Hand crafted leather with tone-on-tone stitching that delicately enhances the canneté effect. Leather handles that look like buttonholes and a curved metal frame embellished with genuine brass detail. The value of Morica lies in its attention to detail and its use of high-quality materials.
BRAND
Morica
PRODUCT TYPE
Dresser
PRODUCTION
Made in Italy
COLLECTION
Canette
DOORS
Sideboard with 4, 30 mm thick doors, in MDF with real Laguna sessile oak veneer, finished using varnishes with a very low environmental impact.
DRAWERS
The dresser interior consist of two drawers in MDF veneered in Laguna sessile oak, and two 6 mm shelves in clear smoked glass with height-adjustable supports.
CLEANING
The regular and appropriate cleaning of furnishings is an important and decisive factor for extending their life. For cleaning, a few precautions are necessary to avoid damaging the finish of the materials. In general, it is advisable to avoid the use of abrasive or too aggressive products which could damage the product. Before using a cleaning product, we recommend testing a small, hidden area. When cleaning flat surfaces, motion should be horizontal or vertical and be parallel to the grain of the wood as much as possible. It should also be remembered that real wood furniture exposed to direct light changes its color over time. This change is considered to be a natural process of oxidation of the raw material.
FABRIC
Dry-clean the fabric with special commercial products
DOWNLOADS
↓ Technical Sheet
↓ Assembly Instructions
ENVIRONMENT
Indoor
THICKNESS
4.30 mm
BASE
Powder-coated curved metal base in a dark burnished finish with genuine brushed brass detail. Burnished, soft-closing hinges and push-pull mechanisms for the doors. The dresser is available olso with 4 clear smoked glass shelves as standard.
HANDMADE
Two doors upholstered in anthracite-coloured genuine leather crafted by hand to create an irregular, rounded ‘canneté’ effect with a solid wood profile joined at 45° and a hollow to aid opening.
GLASS
Solid Wood Joined For daily cleaning of the pattered glass, use specific products for glass and a soft cloth. Murano glass should only be washed with lukewarm water and mild soap. Do not use ammonia or corrosive chemicals.
MARBLE
The metal parts with an epoxy powder coating must be cleaned using a soft cloth moistened with mild soap and water. Under no circumstances should abrasive products, powders, chlorine-based products, acids or bleach be used as they may oxidise or blacken the metal.
WOOD
A dresser fully clad in wood with doors profiled in solid wood joined at 45° and a hollowed handle. Push-pull mechanisms for the leather doors supported by three burnished hinges and soft-closing mechanisms for the wooden doors or drawers. Passion and focus on the minutest detail are mirrored in the quality of a Morica piece.
METAL
The metal parts with an epoxy powder coating must be cleaned using a soft cloth moistened with mild soap and water. Under no circumstances should abrasive products, powders, chlorine-based products, acids or bleach be used as they may oxidise or blacken the metal.
DETAIL
The Canette uses only genuine leather, or nubuck leather, crafted using top-quality threads to inscribe irregular lines that determine its aesthetic feature. Sartorial handiwork for a unique dresser that uses only wood that has been finished using low environmental impact varnishes that capture colour and allow the wood to breathe. The interiors have also been designed in detail, as is the case with all Morica pieces. The Canette particularly features organised drawers and glass shelves that can be adjusted as desired. A quality piece of furniture with a contemporary design for those who wish to possess the ultimate expression of Made in Italy and an environmentally friendly piece of furniture.
DOOR
Four
USE
Interior
SHELVES
Glass
MATERIAL
LEATHER
To clean parts in leather, simply use a cotton cloth moistened with water or a little mild soap. Three to four times a year, depending on wear, specific leather care products can be used to moisturise and provide elasticity, which also create a protective, water-repellent film that will facilitate cleaning.
LAGUNA OAK
Skilful twofold brushing of the raw material using iron and tinex has furnished an sessile oak variant that is inspired by the Venetian lagoon, where the dominant colour is a dark sessile oak grain with lead green detail.
FRAME
The calendered metal frame, with its arched shape and genuine brass detail, provides great value to the dresser as a whole.
STRUCTURE
Structure real wood veneered mdf finished using varnishes with a very low environmental impact.Two doors upholstered in genuine handcrafted leather for an irregular ‘canneté’ effect, and two doors in mdf veneered in real wood. Genuine leather handle detail. Inner drawers in real wood veneered mdf,and inner shelves in clear smoked glass.
BASE Dark burnished curved metal with brushed brass detail.The wood used in Morica’s manufacturing processes is FSC® – Chain of Custody certified, which guarantees traceability of the supply chain and the provenance of raw materials from responsibly managed forests. The varnishes used to make our pieces are water-based and are sourced from ISO14001 certified companies. Our manufacturing processes are environmentally friendly because for us, design means living in a more sustainable world! All our creations are Made in Italy and undergo strict quality controls.
The leather has been carefully selected to meet the strict standards of quality and environmental sustainability. Our leather is of Italian origin (Leather from Italy – full cycle UNI EN 16484 certification) and is certified for low environmental impact and reduced emissions (Carbon footprint of products – ISO 14067: 2018; der Blaue Engel – RAL UZ 148); Environmental Product Declarations – EPD® System ISO 14025.
CARE INSTRUCTION
PRODUCT CARE
Wood and mdf our furniture pieces, in solid wood and genuine mdf veneered wood, are handcrafted items of the highest quality, finished using varnishes with a very low environmental impact. Maintenance of these pieces is easy and only a few steps are required to keep them in good condition.
For daily cleaning of furniture with eco-sustainable, water-based finishes, simply use a dry or slightly moistened cloth, while in the case of persistent stains use a vegetable sponge with mild soap and water. No oils or waxes should be used on furniture containing water-based finishes. Chemicals should also be avoided as they may corrode the varnish and create additional stains or halos. When cleaning flat surfaces, motion should be horizontal or vertical and be parallel to the grain of the wood as much as possible.
It should also be remembered that real wood furniture exposed to direct light changes its colour over time. This change is considered to be a natural process of oxidation of the raw material. Leather To clean parts in leather, simply use a cotton cloth moistened with water or a little mild soap. Three to four times a year, depending on wear, specific leather care products can be used to moisturise and provide elasticity, which also create a protective, water-repellent film that will facilitate cleaning.