Nola Örebro Bike Rack
ÖREBRO BIKE RACK
ÖREBRO BIKE RACK
Designed By Nola
Örebro is formed by a length of bent steel resting on two legs. Double steel strips are designed to hold bicycle wheels securely in place, providing space for chains and locks to be securely fastened.
Örebro’s simplicity enables it to blend in with outdoor urban settings and contemporary architecture. Single-sided and double-sided version are available, with spaces for eight bicycles or ten.
INFORMATION
BRAND
Nola
PRODUCT TYPE
Bike Rack
COLORS
- RAL 9005
- Hot-dip galvanized steel
ASSEMBLY AND PLACEMENT
- Fully assembled.
- In-ground : Cast in ground.
FIVE-WHEEL VERSION
-Length: 250 cm(200 cm) -Height: 60 cm -Height of wheel holders: 45 cm
-Distance between wheel holders: 50 cm -Depth of single-sided version: 17 cm -Depth of double-sided version: 30 cm -C distance between legs: 175 cm -Distance from ground to bottom of frame: 15 cm -Pipe: Ø 42 x 2 mm
-Wheel holder: Ø 11 mm
COLLECTION
Örebro
PRODUCTION
Made in Sweden
VERSIONS
Örebro is available as a single-sided bicycle rack with space for four or five bicycles. It can also be made an be angled left, right or forward-facing.
CHARACTER
Örebro is a classic bicycle rack that blends in with outdoor urban settings and architectural backdrops.
STRIPS
Double Steel
DESIGNER
Nola
MAINTENANCE
-Powdercoated Steel : Products that are powder-coated can be touch-up painted with alkyd paint.
-Hor dip galvanized Steel : Hot-dip galvanized can be touch-up painted with so-called "cold galvanizing".
POWDER COATING
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
STEEL
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
APPEND TO PRODUCT NUMBER
-V= Wheel holders with a left-facing orientation -H = Wheel holders with a right-facing orientation -R = Wheel holders with a forward-facing orientation
HOT-DIP GALVANIZED
Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.