Nola Parco Armchair with Tabletop

Parco Armchair with Tabletop

Nola Parco Armchair with Tabletop

PARCO ARMCHAIR WITH TABLETOP

Design By Broberg & Ridderstråle

Part of the Parco series, this contemporary swivel chair is complemented by an integrated tabletop.

Like other products in the Parco furniture group, the swivel chair and tabletop are functional and hard-wearing.

The swivel chair can be mixed and matched with other Parco products to create customised outdoor seating arrangements.

Nola Parco Armchair with Tabletop
Nola Parco Armchair with Tabletop

Parco is a versatile series with a range of options and add-on products. Products in the Parco Furniture Series that are in painted beech are intended for indoor use only. Parco Furniture series has been approved in Svanens Husportal (oak) and is environmentally assessed via By ggvarubedömningen and SundaHus.

INFORMATION

ASSEMBLY AND PLACEMENT

-IN-Ground : Cast in ground.
-Delivered in parts ready for simple assembly on site.
-Surface Mount : Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

BRAND 

Nola

PRODUCT TYPE

Armchair with Tabletop

INDIVIDUAL DIMENSIONS

The end caps, mounting plates & footplate are made in 8 mm laser-cut steel plate

COLLECTION

Parco

ENVIRONMENT

Indoor

APPEND TO PRODUCT NUMBER

- Wood and finish
- JAT for jatoba.
- EK for oiled oak.
- SIOO for sioo:x treatment oak.
- Painted beech is for indoor use only.
- BG for painted beech wood in NCS-S 8000-N (Grey).
- BR for painted beech wood in NCS-S 2070-Y80R (Red).

Nola Parco Armchair with Tabletop

WOOD 

Oak & Beech Wood

PRODUCTION

Made in Sweden

VERSIONS

-The tabletop may be ordered in grey marble. -Available as a swivel chair or fixed seat, ground-mounted, or with a baseplate that bolts to the surface.

COLORS

- RAL 1023
- RAL 2001
- RAL 6025
- RAL 7022
- RAL 9006
- NCS S 8000-N (Grå)
- NCS S 2070-Y80R (Röd)

DIMENSIONS AND WEIGHT

- Height : 78 cm
- Sitting Height : 45 cm
- Diameter : 30 cm
- Depth : 45 cm

Nola Parco Armchair with Tabletop

THE BASEPLATE

Diameter is 250 mm

THE BOLTHOLE

Diameter is 13 mm for M12 bolts

DESIGNERS

- Broberg 
- Ridderstråle

SURFACE FINISH

Metal

AVAILABLE COLORS

7

INSTALLATION TYPE

- M for in-ground.
- N for surface mount.

 PRODUCT NUMBERS AND COMBINATIONS

19-20Parco chair19-22Parco swivel chair19-20/30Parco tabletop for chair, steel plate with Ø 30 cm, 6 mm thick 19-20/30CARRTabletop in Carrara marble Ø 30 cm, 10 mm thick -B11-06 Startup cost for powder coating steel in a color other than standard. Choose a RAL color. -B11-07 Starting cost for another color of wood. Choose brown or grey for Linax or an NCS color for painted wood. If you want the same color on both steel and wood, choose the RAL color for both. (Painted wood is only for indoors).

THE SUPPORT POST

Diameer is 60 mm (swivel Ø 50 mm)

CHARACTER

A contemporary swivel chair with an integrated tabletop.

DESIGERS - BROBERG & RIDDERSTRÅLE

Stockholm based Broberg & Ridderstråle Design & Architecture is founded and run by Mats Broberg and Johan Ridderstråle. The duo met at the University College of Arts, Crafts and Design (Konstfack) where they both studied furniture and interior design.Today they work within the fields of architecture and design. Their design method is based on the traditional craft, where they often gather inspiration from their daily lives only to then add a new twist to the design that lifts the product to a new level. Broberg & Ridderstråle have throughout the years designed numerous products and furniture series for Nola.

Nola Parco Armchair with Tabletop

MATERIAL AND SURFACE TREATMENTS

JATOBA - FSC-CERTIFIED

Our FSC-labeled Jatoba is an untreated, very hard, and strong hardwood with a long shelf life. It has a brown color with black accent stripes that changes to a deep and rich red color over time.

BEECH

The wood of the beech is hard and tough. The wood is striated, which means that the grains are evenly distributed over the entire annual ring. The annual rings are visible, and the wood has an even structure. The color of the wood is yellow, red or brownish-white.

STEEL

Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.

WOOD OIL

Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.

POWDER COATING

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

OAK

Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.

SIOO:X TREATMENT

Sioo:x is a wood protection with environmentally friendly silicon technology. Water-based and biocide-free. We use Sioo mainly for our oak furniture. Sioo:x treatment of is suitable for all woods, outside as well as inside, and gives a light surface without pigments.

The surface is UV-resistant, water-repellent and non-stick. Active and preventive action against algae, mould and pests. Also rot-proof, wood-strengthening and fire-retardant. This wood protection provides long durability and easy maintenance.

ELECTROGALVANIZED

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

MAINTENANCE

JATOBA

Jotoba basically requires no maintenance apart from regular wiping down.

POWDERCOATED STEEL

Products that are powder-coated can be touch-up painted with alkyd paint.

COATING

Powder-coated steel in gloss 40. Powder coating can be ordered in a spray bottle. Painted beech wood, gloss 25.

OILED OAK

Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.

PAINTED BEECH - INDOORS ONLY

Painted beech is touch-up painted with water-based indoor paint. Maintenance intervals approximately 1 time per year. Damage and cracks should be repaired immediately. If the primer has worn off and the wood is open, it is important to prime first. Ask us at Nola for which paint and color suits your product.

SIOO:X TREATMENT OAK

Sioo:x-treated products are treated twice upon delivery; once with a wood protection (Premium Träskydd Altan) and once with a surface protection (Premium Ytskydd Altan). After 12 - 18 months, for best durability, the surface should be treated once more with Sioo:x Premium Ytskydd Altan. It is important to keep the product clean, otherwise the surface protection can be destroyed. Products that are exposed to heavy mechanical wear may need extra treatments.The surface treatment has a tested effect according to the standards EN 46 and EN 113.