Nola Arkipelag Park Bench
ARKIPELAG PARK BENCH
ARKIPELAG PARK BENCH
Design By Fredrik Toller
When Sweco Arkitekter was commissioned by Jernhusen to redesign Centralplan outside Stockholm Central Station, a new line of park benches was installed to the site.
The seating made for the site was designed by landscape architect Fredrik Toller with Nola chosen as the manufacturing partner. As the name Arkipelag (Swedish for ‘archipelago’) suggests, the seating is conceived as a cluster of small islands.
They make space for plants and shrubs and provide a combination of simple bench seats and park bench designs made with back- and armrests.
INFORMATION
BRAND
Nola
PRODUCT TYPE
Park Bench
COLLECTION
Arkipelag
PRODUCTION
Made in Sweden
DESIGNER
Fredrik Toller
ENVIRONMENT
Outdoor
COLOR
RAL 9005
VERSIONS
Available as a park bench and a bench without a backrest.
DIMENSIONS
- Height : 93 cm
- Armrest Height : 74 cm
- Sitting Height : 49 cm
LENGTH
- 307 cm
- 207 cm
- 107 cm
WIDTH
- 68 cm
- 54 cm
- 68/70 cm
FRAME/ ARMREST
40 x 10 mm
WOOD DIMENSION
70 x 40 mm
CHARACTER
Available in several versions, this robust seating has a long lifespan and requires minimal maintenance.
APPEND TO PRODUCT NUMBER
- Wood and finish
- CU for cumaru.
- JAT for jatoba.
- C for other wood other than standard, start-up cost is added.
MAINTENANCE
-Powdercoated Steel : Products that are powder-coated can be touch-up painted with alkyd paint.
-Journey : Jotoba basically requires no maintenance apart from regular wiping down.
-Cumaru : Cumaru shifts in a reddish shade and does not need any maintenance thanks to its natural properties. Over the years Cumaru ages into a beautiful silver gray tone.
ASSEMBLY AND PLACEMENT
-Fasteners for mounting on top of walls not included.
-The product is freestanding but can be attached to the surface.
-Surface mount : Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included .
-Mounted on wall : Frames are attached to concrete or stone walls with expanders or chemical anchors. Seat sections mounted on top of walls are attached to the frames.
FINISH
Metal
MOUNTING
Surface
PRODUCT NUMBERS AND COMBINATIONS
- B11-05Additional cost for choosing non-standard wood.
- B11-06Additional cost for choosing RAL powder coated paint in a non-standard color.
- U17-90NCU/U7Archipelago park bench in cumaru wood with frame in black RAL 9005
- U17-90NCU/U11Archipelago park bench in cumaru wood with frame in black RAL 9005
- U17-90MURCU/U8Archipelago park bench wall-mounted version in cumaru wood with frame in black RAL 9005
- U17-91MURCU/U9Archipelago backless bench wall-mounted version in cumaru wood with frame in black RAL 9005
MATERIAL
POWDER COATING
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
STEEL
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.
ELECTROGALVANIZED
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
CUMARU
Cumaru is sometimes called Brazilian Teak and is a hard and durable type of wood. The wood changes in a red/brown shade and does not need surface treatment thanks to its natural properties. Over the years Cumarun ages in a beautiful silver gray tone.
JATOBA - FSC-CERTIFIED
Our FSC-labeled Jatoba is an untreated, very hard, and strong hardwood with a long shelf life. It has a brown color with black accent stripes that changes to a deep and rich red color over time.