Nola Frame Planter

FRAME PLANTER

Nola Frame Planter

FRAME PLANTER

Designd by Mats Broberg and Johan Ridderstråle

The Frame series of planters are generous in size and characterised by sides that taper inwards and upwards from the base.

The sides meet the upper part of the frame at an inner point, leaving the upper part of the frame visible while concealing the lower half.

The design highlights the top part of the frame as it cast subtle shadows over the sides.

Nola Frame Planter

INFORMATION

BRAND

Nola

PRODUCT TYPE 

Planter

STEEL

Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.

COLLECTION

Frame

PRODUCTION 

Made in Sweden

Nola Frame Planter

DIMENSIONS 130 VERSION

- Height : 52 cm
- Length/Width : 55 cm

WEIGHT

- 120 Version : 35 kg
- 130 Version : 24 kg
- 340 Version : 44 kg
- 730 Version : 55 kg

DIMENSIONS 120 VERSION

- Length : 120 cm
- Width : 30 cm
- Height : 40 cm
- Volume : 120 l

Nola Frame Planter

SIDES

Slope

STANDARD COLORS

Noir 2200 Sablé

Nola Frame Planter

DIMENSIONS 340 VERSION

- Height : 68 cm
- Length/Width : 70 cm

CHARACTER

This set of planters is characterised by sides that taper inwards and upwards from the base. The design is simple, but has a lot of impact.

DIMENSIONS 730 VERSION

- Height : 92 cm
- Length/Width : 95 cm

Nola Frame Planter

VARIANTS 

Available in 120-litre, 130-litre, 340-litre or 730-litre versions.

DESIGNERS

- Mats Broberg
- Johan Ridderstråle

ELECTROGALVANIZED

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

POWDER COATING

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

SHEET STEEL

The planters are made from rust-resistant sheet steel powder-coated. The biggest planter 750 l is blasted, galvanized and painted.

MAINTENANCE

Products that are powder-coated can be touch-up painted with alkyd paint.

ENVIRONMENT

Outdoor

VOLUME

120

PRODUCT NUMBERS AND COMBINATIONS

13-56 : Frame planter 130 liter
13-57 : Frame planter 340 liter
13-58 : Frame planter 120 liter
13-59 : Frame planter 730 liter
13-57BT25 : Irrigation tank 25L for Frame 340 liter model
13-58G-1 : Waterproof rubber liner for Frame 120 litre model
13-56G-1 : Waterproof rubber liner for Frame 130 litre model
13-57G-1 : Waterproof rubber liner for Frame 340 litre model
-B11-06 : Startup cost for powder coating steel in a color other than standard

Nola Frame Planter

ASSEMBLY AND PLACEMENT

-Freestanding : Freestanding product that is placed directly on the ground.
-Surface mount : Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

LINER

Waterproof

FINISH

Metal

Nola Frame Planter
Mats Broberg & Johan Ridderstråle

DESIGNER - MATS BROBERG AND JOHAN RIDDERSTRÅLE

Stockholm based Broberg & Ridderstråle Design & Architecture is founded and run by Mats Broberg and Johan Ridderstråle. The duo met at the University College of Arts, Crafts and Design (Konstfack) where they both studied furniture and interior design. Today they work within the fields of architecture and design. Their design method is based on the traditional craft, where they often gather inspiration from their daily lives only to then add a new twist to the design that lifts the product to a new level. Broberg & Ridderstråle have throughout the years designed numerous products and furniture series for Nola.