Timberlab Eye-solar Outdoor Light
EYE-SOLAR OUTDOOR LIGHT
EYE-SOLAR OUTDOOR LIGHT
The EYE solar is a development of the normal EYE.
The fixture is equipped with a PV panel in combination with a state of the art built-in control electronics and energy storage.
The solar energy is stored as efficiently as possible. Due to the contemporary and slender design and the aging of the wood, the luminaire is hardly present during the day.
In the dark, the EYE shows its best side. With just enough light to functionally illuminate a path or access road.
INFORMATION
BRAND
Timberlab
PRODUCT TYPE
Light
LIGHT COLOUR
- 2.200k
- 2.700k
- 4.000k
- Amber Led
USE
Outdoor
IP CLASS
IP54
WOOD TYPE
Oak
QUALITY MARK
-FSC -PEFC
SIZE
- Length 50cm + 50cm in ground
- Length 90cm + 60cm in ground
ARTICLE NUMBE
See products generator on page 126.
LIGHTING DATA
Lighting data available on request.
SENSOR
The fixture can be fitted with a built-in PIR presence sensor. The LED will illuminate at 10% after switching on. When motion is detected, the LED will switch temporarily (5min) to the maximum light output.
VARIATION
At Timberlab, every fixture is carefully produced for you. In addition to the standard options, we are happy to create variations for your application.
LIFESPAN
Every type of wood has its own durability rating. More information about this can be found under “Types of wood” & “Sustainability”. The LED module has an expected lifespan of> 100,000 hours.
ACCESSORIES
There is an anti-theft for the EYE solar solution available which makes the pole more difficult to remove
LUMEN OUTPUT PER LED MODULE
Lumen output varies depending on the season and weather type.
BEAM ANGLE
The LED module has a beam angle of 155x65 degrees.
POWER PER LED MODULE
1-Watt max
DOWNLOADS
↓ Data Sheet
HIGH
500mm or 900mm high
FEATURES
-An anti-theft solution is available for the EYE solar, which makes the pole more difficult to remove. -The luminaire can be fitted with a built-in PIR presence sensor. The LED will illuminate at 10% after switching on. When detecting movement, the LED will switch temporarily (5 min) to the maximum light output.