Secto Design Owalo 7030 wall lamp: Reading light
OWALO 7030 WALL LAMP : READING LIGHT
OWALO 7030 WALL LAMP: READING LIGHT
The Owalo 7030 is a turning wall light that gently follows your every illumination need. Commonly used as a reading light by the bed.
INFORMATION
BRAND
Secto Design
PRODUCTION
Made In Finland
COLLECTION
Owalo
PRODUCT TYPE
Wall Lamp
VOLTAGE
100-240V 50/60Hz
DIMMING
Non-dimmable
MATERIAL
Form pressed birch slats, fine textured powder coated steel arm, acrylic diffuser
LIGHT SOURCE
A built-in LED, 7 W, 2850 K, 630 lm, CRI 85. This product contains a light source of energy efficiency class E.
DALI
Attachable to DALI systems with a separate DALI-compatible trailing edge (phase cut off) type dimmer, but not dimmable. Due to great variation in DALI systems, Secto Design does not supply DALI-dimmers. Please contact your local electrician.
CABLE
230 cm, textile cable, switch on the cable. Also available with direct wall mounting.
CLASSIFICATION
Ingress Protection IP20, IEC Protection Class II, CE marking
MAINTENANCE
Wipe dust regularly. To remove fresh stains wipe with a slightly damp cloth.
PACKAGE
56 × 40 × 16 cm
BASE
11.5 cm
WEIGHT
- Weight Package : 2.5 kg
- Weight Dimensions : 1.4 kg
OWALO 7030 WALL LAMP
Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen. Comes with the latest LED-technology.
DIMENSION
- Height 47 cm
- Depth 33 cm
- Width 7 cm
ARM
- White
- White
- Black
- White
LIGTH
LED
CODE
7030
CABLE
- White
- White
- Black
- White
SHADE
- Natural birch
- White laminated
- Black laminated
- Walnut veneer
TECHNICAL DRAWING
OPENING INSTRUCTIONS
- Step 1 : Lift up the lamp body from the package by holding it from the sheltering structure around it.
- Step 2 : Remove the top sheltering element and the bottom part of the package.
- Step 3 : Plug in the lamp cord.
SWITCH ON CABLE (STANDARD)
- Step 1 : Loosen the small lock screws.
- Step 2 : Turn the lamp shade to its final position.
- Step 3 : Tighten the small lock screws.
- Step 4 : Remove the big lock screws.
- Step 5 : Put the wall part in right place and screw tight both of the screws.
- Step 6 : Place in the big lock screws.
DIRECT WALL MOUNTING
- Step 1 : Loosen the small lock screws.
- Step 2 ; Turn the lamp shade to its final position.
- Step 3 : Tighten the small lock screws.
- Step 4 : Remove the big lock screws.
- Step 5 : Put the wall part in right place and screw tight both of the screws.
- Step 6 : Connect the wires: L=brown, N=blue.
- Step 7 : Place in the big lock screws.
LIGHT DISTRIBUTION
Light distribution curve of Owalo 7030. Polar curve of the angular Luminous Intesity distribution at two perpendicular C planes.