Secto Design Secto 4230 wall lamp
Secto 4230 wall lamp
SECTO 4230 WALL LAMP
Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen. The wood provides a soft luminosity for atmosphere and appeal.
INFORMATION
BRAND
Secto Design
PRODUCTION
Made In Finland
COLLECTION
Secto
PRODUCT TYPE
Wall Lamp
DETAIL
The back plate of the Secto 4230 / Secto Small 4231 wall lamp is made of powder painted steel. The lamp base is attached to the back plate. The shade has wooden rails for the plate. The plate is fastened to the shade with a top screw.
DIMENSION
- Height : 60 cm
- Depth: 9–18 cm
- Width: 13–31 cm
MATERIAL
Form pressed birch slats, powder coated steel back plate
VOLTAGE
220-240VAC 50Hz
BACK PLATE
White
CABLE
240 cm, textile cable, switch on the cable. Also available with direct wall mounting.
PACKAGE
36 × 20 × 66 cm
CABLE
White
WEIGHT
- 1.1 kg
- 2.0 kg
DALI
Attachable to DALI systems with a separate DALI-compatible trailing edge (phase cut off) type dimmer, but not dimmable. Due to great variation in DALI systems, Secto Design does not supply DALI-dimmers. Please contact your local electrician.
LIGHT SOURCE
E14 base, LED max 20 W. Comes with a LED bulb (Airam Pro LED, E14, 6 W, 470 lumen, 3000 K, pure white, dimmable, may vary). The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating. This product is supplied with an example bulb of energy efficiency class E.
CLASSIFICATION
Ingress Protection IP20, IEC Protection Class II, CE marking
MAINTENANCE
Wipe dust regularly. To remove fresh stains wipe with a slightly damp cloth.
SHADE
- Natural birch
- White laminated
- Black laminated
- Walnut veneer
TECHNICAL DRAWING
LIGHT DISTRIBUTION
Light distribution curve of Owalo 7030. Polar curve of the angular Luminous Intesity distribution at two perpendicular C planes.
SWITCH ON CABLE (STANDARD)
-Step 1 : Loosen the small lock screws.
-Step 2 : Remove the wall part from the lamp shade.
-Step 3 : Put the wall part in right place and screw tight both of the screws.
-Step 4 : Place in the light bulb..
-Step 5 : Place in the lamp shade by first pushing it inwards, and then slide it through the rails downwards.
-Step 6 Place in the top lock screw.
DIRECT WALL MOUNTING
-Step 1 :Loosen the top lock screw.
-Step 2 ; Remove the wall part from the lamp shade.
-Step 3 : Put the wall part in right place and screw tight both of the screws. Warning: Switch off the electricity in order to avoid electric shocks.
-Step 4 :Connect the wires: L=brown, N=blue.
-Step 5 : Place in the light bulb.
-Step 6 : Place in the lamp shade by first pushing it inwards, and then slide it through the rails downwards.
-Step 7 : Place in the top lock screw.
PLATE INSTRUCTIONS
-Hole 1 : To raise the lamp of the wall and a possible means to secure the fixture to the wall.
-Hole 2 : For securing the lamp to a wall socket.
-Hole 3 : For hook suspension.
-For treading the wall mount version's cables through the plate. Screws and hooks for securing the fixture are not included.
BACK PLATE DETAILS AND MEASUREMENTS
-Height : 15.5 cm / 6.1 in
-Width : 10.5 cm / 4.1 in
The wall lamp can be installed with the cone part upwards or downwards. When the cone part is downwards the cable runs down between the plate and the wall.
-Pic 1 : The standard version comes with a cable, a switch and a plug.
-Pic 2 : The wall mount version (by special order) can be mounted directly to the cables coming out of the wall socket by an electriciant
The back plate is screwed (screws not incl.) to the wall. The wooden shade is then slid onto the plate along the wooden rails which are on the long sides of the shade. Alternatively the wall lamp can be hung to a wall hook (not incl.) after the plate is attached to the shade.
GALLERY
