Secto Design Teelo 8020 Table Lamp
TEELO 8020 TABLE LAMP
TEELO 8020 TABLE LAMP
A bold table lamp with a sculptural tone. Note the detail in the design of the joints.
INFORMATION
BRAND
Secto Design
PRODUCTION
Made In Finland
COLLECTION
Teelo
PRODUCT TYPE
Table Lamp
VOLTAGE
220-240VAC 50Hz
DIMMING
Non-dimmable
MATERIAL
Form pressed birch, powder coated steel inner stand
CABLE
220 cm, textile cable, switch on the cable
DALI
Attachable to DALI systems with a separate DALI-compatible trailing edge (phase cut off) type dimmer. Due to great variation in DALI systems, Secto Design does not supply DALI-dimmers. Please contact your local electrician.
LIGHT SOURCE
E27 base, LED max 20 W. Comes with a LED bulb (Airam Pro LED, E27, 12 W, 1060 lumen, 3000 K, pure white, dimmable, may vary). The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating. This product is supplied with an example bulb of energy efficiency class F.
CLASSIFICATION
Ingress Protection IP20, IEC Protection Class II, CE marking
MAINTENANCE
Wipe dust regularly. To remove fresh stains wipe with a slightly damp cloth.
PACKAGE
42 × 38 × 16 cm
WEIGHT PACKAGE
1.7 kg
CABLE
- Natural birch
- Walnut veneer
OWALO 7030 WALL LAMP
Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen. Comes with the latest LED-technology.
DIMENSION
- Height : 38 cm
- Depth : 33 cm
- Width : 33 cm
- Diameter : Ø 11 cm
INNER CASE/CABLE
- White
- White
WEIGHT
1.0 kg
CODE
8020
DETAIL
Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen.
TECHNICAL DRAWING
ASSEMBLY INSTRUCTIONS
- Step 1 : Take out the light bulb from the package.
- Step 2 : Remove the bottom part of the package.
- Step 3 : Lift up the lamp body from the package by holding it from the sheltering structure around it.
- Step 4 ; Remove the two top sheltering elements.
- Step 5 : Remove the two remaining sheltering elements.
- Step 6 : Pull out the socket unit inside the lamp body and install the light bulb into the socket.
- Step 7 : Re-install the socket unit into to the lamp body, and plug in the lamp cord.