Forms+Surface Universal & Recycling Receptacle
UNIVERSAL LITTER & RECYCLING RECEPTACLE
UNIVERSAL LITTER & RECYCLING RECEPTACLE
Universal Litter & Recycling Receptacles offer beauty, performance and design options in stainless steel.
INFORMATION
USE
Receptacles for litter, recycling, compost, ash or combined use
BRAND
Forms+Surface
PRODUCT TYPE
Outdoor Bench
MATERIAL
Stainless steel construction
GALLONS
Round receptacles from 12- to 36-gallons
BODY
Five stainless steel finishes for receptacle body
DETAIL
- A variety of optional Eco-Etch, Perforation and Impression patterns
- Polyethylene liners; multiple liners for multiple-stream receptacles
- Freestanding or surface mount
- High recycled content; fully recyclable
FINISHES
-Eco-Etch patterns are applied using an advanced photolithographic beadblasting system. -Impression patterns are stamped, high relief designs. -Perforation patterns add a unique visual element.
RECEPTACLES
Stainless Steel with Sandstone, Seastone, Linen, Diamond, or Satin finish are available for all Universal Receptacles.
PATTERNS
Three different body patterns are available for an upcharge; see page 7 for standard patterns.
CONFIGURATIONS
-Universal Receptacles are available in top- and side-opening configurations with 36-, 30-, 24-, and 12-gallon capacities. -Top-opening configurations have the same number of liners as lid openings. -With the exception of 12-gallon models, side-opening configurations can be specified with one full liner or two half liners with an internal baffle
GRAPHICS
-Instructional graphics are available with a variety of standard messages that clearly indicate the use for each opening. -Graphics have white letters and symbols with black, blue, or green backgrounds. -Graphics are printed on the back of clear, lightly textured polycarbonate, protecting them from wear over time.
MAINTENANCE
-Polyethylene and metal surfaces can be cleaned as needed using a soft cloth or brush with warm water and a mild detergent. Avoid abrasive cleaners. -Use caution when cleaning over graphics.
INSTALLATION
-Universal Receptacles may be used freestanding or surface mounted.
-For surface mounting, stainless steel anchors and mounting bolts sold separately. -For freestanding, levelers are supplied for all polyethylene base receptacles.
BASE
Standard 1.5" high tapered bases are molded polyethylene with a UL94HB fire rating and are slate-colored with a light texture.
AVAILABLE
Lids available in polyethylene and stainless steel
VARIETY
A variety of optional Eco-Etch, Perforation and Impression patterns
LID
-Lid material options vary per receptacle size, as described below and illustrated on pages 3-6. -36- and 24-gallon receptacle lids are molded polyethylene. Top-opening lids with 10" diameter openings are also available in stainless steel for an upcharge. -30-gallon receptacle lids are stainless steel. -12-gallon receptacles are available in multiple variations: top-opening lids of molded polyethylene, or, for an upcharge, stainless steel; side-opening receptacles with dome lids of molded polyethylene; and side-opening receptacles with concealed ash lids of stainless steel.
-Molded polyethylene lids have a UL94HB fire rating and are slate-colored with a light texture. -Stainless steel lids have a Satin finish. -Tether cables are available to connect receptacle lid to body.
TECHNICAL DRAWINGS
12 GALLONS
30 GALLONS
24 GALLONS
36 GALLONS
