Secto Design Oy

Secto Design Kuulto 9100 ceiling lamp

Kuulto 9100 ceiling lamp

KUULTO 9100 CEILING LAMP

Kuulto 9100 ceiling lamp:
Independent yet modular


Kuulto brings new character to the world of ceiling fixtures, where wood as material is not commonly encountered. A modular entity also for the wall.

Secto Design Kuulto 9100 ceiling lamp

INFORMATION 

BRAND

Secto Design

PRODUCTION

Made In Finland

COLLECTION

Kuulto

PRODUCT TYPE

Table  Lamp

VOLTAGE

220-240VAC 50Hz

DIMMING

Non-Dimmable

MATERIAL

- Acrylic Diffuser
- Form pressed birch slats
- Fine Textured Powder Coated Steel Case

INSTALLATION

Separate instructions on the website.

Secto Design Kuulto 9100 ceiling lamp

LIGHT DISTRIBUTION

Light distribution curve of Kuulto 9100. Polar curve of the angular luminous intensity distribution at two perpendicular C planes and at C plane with maximum luminous intensity.

LIGHT SOURCE

A built-in LED by aLED, 20 W, 3000 K, 3100 lm, CRI > 80. This product contains a light source of energy efficiency class C.

CLASSIFICATION

Ingress Protection IP20, IEC Protection Class II, CE marking

MAINTENANCE

Wipe dust regularly. To remove fresh stains wipe with a slightly damp cloth.

PACKAGE DIMENSIONS

59 × 59 × 18 cm

DIMENSIONS

- Height 15 cm
- Width 52 cm

Secto Design Kuulto 9100 ceiling lamp

FINISHING

- Natural Birch : White
- White laminated :White
- Black laminated: White
- Walnut veneer: White

WEIGHT

5.5 kg

PACKAGE WEIGHT

7.6 kg

DETAIL

Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen.

TECHNICAL DRAWINGS

Secto Design Kuulto 9100 ceiling lamp

OPENING INSTRUCTIONS

-Step 1 : WARNING: Don't lift the lamp from the shade, instead always hold it from the lamp body.
-Steps 2 : Lift up the lamp body from the package by holding it from the sheltering structure around it.
-Step 3 : Remove the two bottom elements that locks the sheltering structure.
-Step 4 : Open the sheltering structure.
-Step 5 : Lift up the lamp by holding it from the lamp body. WARNING: Don't lift the lamp from the shade.

Secto Design Kuulto 9100 ceiling lamp

INSTALLATION INSTRUCTIONS

-STEP 1 : The lamp includes: A) shade, B) electric cable, and C) back plate, size 24,5 x 18,4 cm, height 1,4 cm
-Steps 2, 3 : The lamp is directly mounted to the cables coming out of the ceiling socket. Please consult an electrician regarding the power cable installation!
-Step 4 : Screw the back plate to the wall (screws not incl.)
-Step 5 : Slide the wooden shade onto the plate along the wooden rails and connect the electric cables together.
-Step 6 : Slide the lamp until the lock secures the position.

Secto Design Kuulto 9100 ceiling lamp

CLEANING INSTRUCTIONS

-Step 1 : Switch off the electricity.
-Step 2 : Lift the lamp and unlock it to slide. NOTE: The lamp should still be supported by the rail until the step 4.
-Step 3 : Slide the lamp until the connector becomes accessible.
-Step 4 : Disconnect the connector.
-Step 5 : Slide the lamp and remove from the rail.
-Step 6 : Remove the screws. NOTE: Protect the acrylic glass and wooden part with soft material.
-Step 7 : Lift up the back plate and remove dust. Be careful not to scratch.

Secto Design Oy
T +358 9 5050598
Secto Design Oy
Kauppalantie 12, 02700 Kauniainen, Finland