
Light Point Stripe Pendant Black
STRIPE PENDANT BLACK
DROP BRASS PENDANT LIGHT
Designed by Ronni Gol
The Stripe pendant lamps come with a 4 meter cable (Each side) and can be cut to size depending on ceiling height.
INFORMATION
SKU
270361
EAN
5711389703615
VOLTAGE
220-240 V
LIGHT SOURCE
LED
TOUCHLESS
No
SIZES
- S1500
- STRIPE S2000
KELVIN
2700
WATT
30
MATERIAL
- Acrylic
- Aluminium
DESIGNER
Ronni Gol
DIMMING
Yes
IP RATING
IP20
BEAM ANGLE
90
LUMEN PR. WATT
110 W
LIFETIME
50.000
LUMEN OUTPUT
2430 lm
NUMBER OF LIGHT SOURCES
1
CLEANING INSTRUCTIONS
-Before cleaning, ensure that the power supply is switched off. -Use only a soft cloth to clean the lamp, dampened with mild cleanser if needed for resistant dirt. -Warning: do not use alcohol or other solvents.
WARRANTY
7 Years
LIGHT DISTRIBUTION
No
INSTALLATION INSTRUCTIONS
Before installing, make sure the power supply is switched off. -After finishing every step, tighten the screws, have the fixture fixed, and then connect the power supply.
Follow the steps as the figure for installation.
-A. loose the adjuster and adjust the cable to the length what you need. Then tighten the adjuster. If there is some extra cable in the base, pls cut it and re-connect the cable as the previous way -B. after drilling, pull out the wires -C. fix the mounting bracket onto the wall with screws. -D. cut off excess wire -E. connect the wires to the terminal block. -F. fix the fixture to the mounting bracket with screws
