Nakts Mebeles Petra Bed With Slats
PETRA BED WITH SLATS
PETRA BED WITH SLATS
The headboard and frame of the bed successfully combine the durability and of wood with the softness and lightness of fabric upholstery.
INFORMATION
BRAND
Nakts Mebeles
PRODUCT TYPE
Bed
MATERIAL
- Wood
- Fabric
SIZE
- 1.4 x 2m
- 1.6 x 2m
- 1.8 x 2m
- 2 x 2m
WOODEN LEG FINISH
Oak
ENVIRONMENT
Indoor
PRODUCTION
Made in Latvia
EXTENSION TO 210CM
No
TECHNICAL DRAWINGS
DETAIL
The solid wood details of the bed are designed to highlight the noble and elegant nature of natural wood by creating fine and flowing lines. The bedroom design can be completed to an impeccable image with spacious and aesthetic dressers, practical nightstands and wall or floor mirrors, which at the same time visually helps to expand the space. Petra bed is available in both single and double beds.
CARE INSTRUCTIONS
UPHOLSTERED FURNITURE CARE INSTRUCTIONS
-Make sure the legs are fitted tightly to the sofa and check them on a regular basis. -Upholstered products should be vacuumed weekly. Because dust and dirt cause fabric to wear faster. -Spills must not be left unattended. Never use strong chemicals, protective agents or detergents. Use of such products will annul the warranty of your product. -To minimize fading, avoid placing your upholstered furniture in direct sunlight. Discoloration of fabric is a natural result of normal use. -Flip, rotate and fluff removable cushions regularly to ensure even wear and increase longevity.
-If you need to move your sofa or chair, avoid dragging it into position. Lift it to prevent scratching the floor or damaging the legs or frame construction. -Several upholstery fabric manufacturers allow the use of delicate washing for some types of chinchillas and micro-woolen fabrics. However, this applies to the fabric itself and not to the piece of furniture. Even with a slight deviation from the fabric washing technology (too hot water, wrong spinning mode, etc.), the fabric structure can be damaged, but the covers may be deformed. Therefore, our technologists do not recommend washing.
WOOD FURNITURE CARE INSTRUCTIONS
-Furniture should be located and used in dry, heated rooms with an air temperature above +10°C (room temperature) with a relative humidity of 40-60%. -Furniture should be protected from direct sunlight as the color of the furniture may change due to sunlight: the surface may unevenly fade, the lacquer and / or paint layer may crack, the mirrors may lose their luste. -Do not place heavy objects and overload furniture shelves and drawers, or add extra weights to furniture doors. -To prevent stains on furniture surfaces and wood swelling, if liquid spills on the surface, it should be cleaned as soon as it has come onto the surface with a soft, moisture absorbent cloth.
-If there is any other type of stain on the furniture, it is important to clean it immediately with a special cleaner for wooden furniture surfaces. The use of abrasive cleaning agents is strictly prohibited -For furniture that has screws or nuts in the joints, it is recommended to tighten them every 6 months as they may loosen during usage. -Never use solvents or abrasives (materials) for daily care of furniture, as their use can damage the surface. -Furniture should be used according to its intended purpose. To prevent deformation of cabinet door hinges and drawers, the doors and drawers must be kept closed when not in use.
Bed with slats
BED WITH SLATS
The wooden bed slats help to even out the weight and pressure points of the sleeper in the mattress, and enhances the ergonomic qualities of the mattress. Bed with slats is being combined with double-sided mattress.
FINISHES
WOODEN LEG FINISH
BERGAMO PALETTE
IEVA PALETTE
OXFORD VELVET FABRIC PALETTE
LIEPA PALETTE
VELVET PALETTE
LOLA PALETTE
ROSITA PALETTE
VELVET FABRIC PALETTE EROS
MEGAN PALETTE
GRACE PALETTE
LIDO NEVOTEX
WOOLY PALETTE
BLUES CS PALETTE
