Tournesol Urban Rectangle & Square Planters

URBAN RECTANGLE & SQUARE PLANTERS 

Gfrc - Lightweight Concrete & Frp - Fiberglass 

Sleek, simple, and elegantly tapered in design, Urban planters are available in FRP fiberglass and lightweight GFRC concrete. Urban planters are designed to be durable despite low weight, even for heavy-traffic locations.

FEATURE 

FRP fiberglass and lightweight GFRC concrete planters are designed to be durable despite low weight

SHAPES 

- Round
- Square
- Rectangular

DETAIL

PRODUCT OPTIONS 

Tournesol’s products are made-to-order. To easily add features to our planters, check our menu of standard options. Note that not all options are available for all products; we also have capabilities beyond the listed options. For something off-menu, speak to a Tournesol Advisor.

CASTERS 

Recessed casters discreetly provide mobility and are available as an option for many of our planter collections. Planters receiving casters are built with reinforced raised bottoms, so that casters are hidden under skirted planter walls. Tournesol installs commercial-grade swiveling casters calculated to support the total weight of the filled planter. Adding casters adds .5” to height and reduces soil depth by 5”, please take this into consideration when selecting your planter height.

Casters are not offered for very large or very narrow planters where weight or tipping hazard can present a challenge. Unique caster configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

DRAIN HOLES 

Whether installing planters on-structure or at grade, thoughtful attention to drainage will keep water and debris from collecting on non-permeable surfaces. We manufacture our GFRC and Steel planters standard with drain holes. For no additional cost, we can produce these planters without holes. Our FRP planters are manufactured without drain holes so they can be drilled as required in the field.

We can add drain holes to FRP planters using our standard drain hole configuration at no additional cost. See chart for details. Unique drainage configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

CARE & MAINTENANCE (FRP FIBERGLASS)

The interior of our FRP planters is sealed with Asphalt Emulsion Henry 107, which acts as a water-resistant sealer and damp-proofer. Planters in exterior applications may have drain holes in the bottom; if not, a pump-out (or siphon) tube must be used to remove water. Water standing at the bottom of the pot over a long period will harm the plant(s) and may break down the planter sealant. A touch-up kit is sent with FRP planters, contact Tournesol for Touch-Up Application and Repair instructions, as needed. Our fiberglass planters are designed to hold up to the elements, yet they may still scratch, crack, or chip if care is not taken.

CARE & MAINTENANCE (GFRC LIGHTWEIGHT CONCRETE)

Concrete is a porous surface that absorbs moisture and minerals, which can cause changes to the surface’s appearance. Like most concrete surfaces, our GFRC can be sealed using commercially available clear concrete sealers, Tournesol uses Brightstone Sealer. Follow the manufacturer’s instructions when reapplying.

The interior of each planter is sealed with Xypex Concentrate as a water-resistant, damp-proofing layer to prevent most efflorescence (water and dissolved minerals transmitted from the pot’s interior to the outside surface). Small surface stress cracks may eventually appear in the container but are typically restricted to the face coat of the concrete, not the stronger backing coat, and will not affect the overall strength and integrity of the planter. A touch-up kit is sent out with GFRC planters, contact Tournesol for application and repair instructions as needed, per finish.

GLASS FIBER REINFORCED CONCRETE - GFRC 

We cast GFRC products in our plant in Juarez, Mexico. GFRC is glass fiber reinforced concrete and is made by combining a mixture of lightfast pigments, fine sand, cement, polymer, water, and alkali-resistant glass fibers. Our GFRC products are available in five textures and a palette of colors. The glass fibers used in GFRC help give this unique compound its strength.

INTERIOR SEALANT 

Once cast, our planters have an interior sealant added as a water-resistant, damp-proofing layer to prevent most efflorescence and cracking.

SHADOW (GFRC-LIGHTWEIGHT CONCRETE)