Tournesol Boulevard Planters Rectangle & Square
BOULEVARD PLANTERS RECTANGLE & SQUARE
BOULEVARD PLANTERS RECTANGLE & SQUARE
Woods
Boulevard commercial-grade planters combine the durability of fiberglass with the warmth of wood.
A fiberglass liner keeps moisture from soil, ground, and irrigation away from the cladding extending the life and beauty of the wood surfaces.
INFORMATION
AVAILABLE DRAIN HOLES
1-5/8” Drain Holes Available Upon Request
BRAND
Tournesol
PRODUCT TYPE
Planters
COLLECTION
Boulevard
USE
Outdoor
USE
Suitable for indoor or outdoor use
MATRIAL
Fiberglass Liner With Wood Cladding
SHAPES
- Square
- Rectangular
PLANTERS
Commercial-grade Planters
SIZES
A Broad Range Of Standard Sizes
COLORS
TECHNICAL DETAIL
TECHNICAL DETAIL
| PRODUCT | SHAPE | LENGTH | WIDTH | HEIGHT | WEIGHT (LBS.) | VOLUME (CUBIC FT.) | INTERIOR DIMS. | IRRIGATION |
|---|---|---|---|---|---|---|---|---|
| BV-1800 | Square | 18” | 18” | 24” | 70 | 3.5 | 16” x 16” x 23.5” | CWC-R1100 |
| BVT-1800 | Square | 18” | 18” | 35” | 100 | 5.2 | 16” x 16” x 35.5 | CWM-R1114-2k |
| BV-241236 | Rectangle | 24” | 12” | 36” | 47 | 5.3 | 22” x 10” x 35.5” | CWM-R1120-MS |
| BV-241818 | Rectangle | 24” | 18” | 18” | 55 | 3.5 | 22” x 16” x 17.5” | CWM-R2014-MS |
| BV-241824 | Rectangle | 24” | 18” | 24” | 85 | 5.2 | 22” x 16” x 23.5” | CWM-R2020-MS |
| BV-241830 | Rectangle | 24” | 18” | 30” | 87 | 5.9 | 22” x 16” x 29.5” | CWM-R2020-MS |
| BV-241836 | Rectangle | 24” | 18” | 36” | 120 | 7.9 | 22” x 16” x 35.5” | CWM-R2020-MS |
| BV-2400 | Square | 24” | 24” | 24” | 85 | 6.6 | 22” x 22” x 23.5” | CWM-R1120-2k |
| BVT-2400 | Square | 24” | 24” | 41” | 145 | 11.3 | 22” x 22” x 40.5” | CWM-R1120-2k |
| BV-361236 | Rectangle | 36” | 12” | 36” | 63 | 7.9 | 34” x 10” x 35.5” | CWM-R1120-2K |
| BV-361818 | Rectangle | 36” | 18” | 18” | 70 | 5.4 | 34” x 16” x 17.5” | CWM-R2014-2K |
| BV-361824 | Rectangle | 36” | 18” | 24” | 105 | 7.8 | 34” x 16” x 23.5” | CWM-R2020-MS |
| BV-361830 | Rectangle | 36” | 18” | 30” | 109 | 9.1 | 34” x 16” x 29.5” | CWM-R2020-2K |
| BV-361836 | Rectangle | 36” | 18” | 36” | 150 | 11.8 | 34” x 16” x 35.5” | CWM-R2020-MS |
| BV-362418 | Rectangle | 36” | 24” | 18” | 78 | 7.5 | 34” x 22” x 17.5” | CWM-R2014-2K |
| BV-362424 | Rectangle | 36” | 24” | 24” | 115 | 10.8 | 34” x 22” x 23.5” | CWM-R2020-MS |
| BV-362430 | Rectangle | 36” | 24” | 30” | 121 | 12.6 | 34” x 22” x 29.5” | CWM-R2020-2K |
| BV-362436 | Rectangle | 36” | 24” | 36” | 142 | 15.1 | 34” x 22” x 35.5” | CWM-R2020-2K |
| BV-362442 | Rectangle | 36” | 24” | 42” | 164 | 17.7 | 34” x 22” x 41.5” | CWM-R2020-2K |
| BV-363018 | Rectangle | 36” | 30” | 18” | 86 | 9.5 | 34” x 28” x 17.5” | CWM-R2014-3K |
OPTIONS
PRODUCT OPTIONS
Tournesol’s products are made-to-order. To easily add features to our planters, check our menu of standard options. Note that not all options are available for all products; we also have capabilities beyond the listed options. For something off-menu, speak to a Tournesol Advisor.
IRRIGATION SYSTEMS
Tournesol’s container irrigation systems are the best in the business, and one of the values of working with Tournesol. Learn more about the systems details below. Speak to a Tournesol Advisor for help selecting irrigation systems for your next project.
TOURNESEAL
Need it watertight? Specify TourneSeal, our waterproofing solution. This is highly recommended for planters that will not have drain holes. We apply specific coatings to our FRP, GFRC, and Steel products, if requested. Follow our warranty requirements and perform a field test for watertightness after installation, before filling with media.
FALSE BOTTOM
Reduce soil volume and weight in planters by adding false bottoms. False bottoms are 24" below the top of the planter unless otherwise specified.If other depth is needed, please contact your Advisor.
BOTTOM REINFORCEMENT
When specifying an FRP planter that won’t have full basal support after installation, such as installing on pedestals, it is recommended to add a bottom reinforcement to reduce damage to a loaded planter. This is also recommended for planters that will be anchored to the underlying surface.
TIE DOWNS
Tie Downs are available for large planters to hold trees in place. These are available for planters in all our materials. Ties are added inside planters at the midpoint. Square planters use four, one in each corner, and round planters use three, spaced equally around the inner circumference.
TOURNESEAL
Need it watertight? Specify TourneSeal, our waterproofing solution. This is highly recommended for planters that will not have drain holes. We apply specific coatings to our FRP, GFRC, and Steel products, if requested. Follow our warranty requirements and perform a field test for watertightness after installation, before filling with media.
SCOOPS
Square and rectangular planters can be connected end-to-end to create linear runs. “Scoops” lower adjacent planter walls allowing them to hide beneath the soil surface, creating a continuous planting along the top. Connector kits to gang planters together are available.
Unique Scoops such as those placed to create t-shapes or corners are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique scoops for your project.
CASTERS
Recessed casters discreetly provide mobility and are available as an option for many of our planter collections. Planters receiving casters are built with reinforced raised bottoms, so that casters are hidden under skirted planter walls. Tournesol installs commercial-grade swiveling casters calculated to support the total weight of the filled planter. Adding casters adds .5” to height and reduces soil depth by 5”, please take this into consideration when selecting your planter height.
Casters are not offered for very large or very narrow planters where weight or tipping hazard can present a challenge. Unique caster configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.
DRAIN HOLES
Whether installing planters on-structure or at grade, thoughtful attention to drainage will keep water and debris from collecting on non-permeable surfaces. We manufacture our GFRC and Steel planters standard with drain holes. For no additional cost, we can produce these planters without holes. Our FRP planters are manufactured without drain holes so they can be drilled as required in the field.
We can add drain holes to FRP planters using our standard drain hole configuration at no additional cost. See chart for details. Unique drainage configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.
