HAVANA BED
HAVANA BED
Designed by Massimo Mottin & Ernesto Barbieri
Havana stands out for the structural characteristics of the four-poster bed, which can also be combined with the fine thick-leather processing the customizable finishes and attention to detail enhance its eclectic spirit.
INFORMATION
BRAND
Tonin Casa
PRODUCT TYPE
Bed
COLLECTION
Havana
PRODUCTION
Made in Italy
DESIGNERS
- Massimo Mottin
- Ernesto Barbieri
CODE
7870S
ITEM
Decorative
MATERIAL
Headboard and bed frame in MDF with Canaletto walnut or black ash Finish. Headboard padding in high-density expanded polyurethane foam, covered in thick leather (optional). Painted metal junction plates.
ENVIRONMENT
Indoor
USE
Interior Furniture
ATTENTION
This data sheet conforms to law no. 126 dated 10th April 1991, “Standards for consumer information” and with Decree no. 101 dated 8th February 1997, “Actuation Regulations”.
DOWNLOAD
↓ Data Sheet
AVAILABLE FINISHES
2
CLEANING
Use a white, wet cloth (make sure it is not dripping). Whenevere using detergents, make sure they were developed specifically for the finishing you own.
DISPOSAL
-Cardboard and other packaging elements, once placed into the proper trash collecting container will be completely recycled. Once discarded, the furniture components must not be dispersed in the environment but instead handed over to the proper Council system of disposal, accordingly to local legislation.
-This furniture unit must be assembled by specialized personnel. The manufacturer denies all liability for any damage due to non-compliance with the attached instructions. The warranty is not valid for damage caused by incorrect use of the product or damage during transport.
USE
If available, at the moment of assembling follow carefully the assembling instructions. Use the product only for its designed purpose.
- Do not use outdoors.
- Avoid dragging the product.
- Do not climb up on the bed.
- Avoid colliding into other objects that may scratch the surface.
- Do not expose to direct sunlight in order to avoid chromatic alterations.
- Do not expose the product to direct heat sources exceeding 50°C (122°F)
- Avoid exposing the product to water or other liquids, even if for a short time.
- Avoid operating on the products parts if such operation is not carried out by professionals.









